Mohawk Product Finishing Products, Inc.
Data Sheet
RUBBING COMPOUND - Level I (LOW SHEEN)
M730-1006 (NEUTRAL)
Available in quarts
------------
Product Description:
The Mohawk Level I Rubbing Compound will produce a
LOW final sheen on coatings such as lacquer, shellac, varnish, etc.
This material is also suitable for the removal of over-spray
and minor surface imperfections.
For rubbing to a Higher Sheen, Use Level II: RUBBING, POLISHING, & FINISHING Liquid Rubbing Compounds.
Advantages:
1. Choice of two colors.
2. Semi Paste form.
3. Quick clean-up.
Product Limitations:
1. For low sheen development.
- - - - - - - - - - - - - - - - - - -
Characteristics:
Weight per gallon: 11.85 ± 0.1 lbs./gal.
Flashpoint: 107 F/42 c
Volatile Organic Compounds (VOC) 450 grams/
Liter, 3.75 lbs./gal.
Spec. Gravity: 1.43 ± 0.01
Boiling Range: 320 F/160 c
Non Volatile (wt): 63.5 ± 1.0%
Package Life: 2 years
Coverage: 400 square feet/gallon
Hazardous Air Pollutants: 0.04 ± 0.005 lb./1 lb. solids
Air Quality Data: Photochemically Reactive
HMIS:
Health: 1
Flammability: 2
Reactivity: 0
Personal Protection: B
Specifications:
Directions:
Surface should be clean and dry.
A fine, semi-paste compound containing fine cutting abrasives.
Can be applied with cloth, burlap or felt to rub down all types of finishes
such as shellac, lacquer and synthetic finishes.
Rubbing Compound can be used for removing defects in topcoats.
For Best Results wait until the finish is fully cured, 14-21 days is recommended.
Safety Cautions:
Contents are EXTREMELY FLAMMABLE.
Vapors may ignite EXPLOSIVELY.
Keep away from heat, sparks and open flame.|
During use and until all vapors are gone, keep area well ventilated.
Avoid breathing of vapor and spray mist. USE ONLY ADEQUATE VENTILATION.
Avoid contact with skin and eyes. Wash hands after using.
Keep container closed when not in use.
Do not transfer contents to other containers for storage.
KEEP OUT OF REACH OF CHILDREN |
