Shellac.net Wood Finish Supply
Select Products for Finishes, Touch-Up, Repair, Maintenance



EPOXY


Epoxies for: Repair, Filling, and Adhesive Applications



SYSTEM THREE - QUICK CURE 5 MINUTE EPOXY
SYSTEMTHREE QuickCure 5 Minute EPOXY
System Three Quick Cure 5 Epoxy
Use QuickCure-5 epoxy adhesive when strong, fast bonds
are required on wood,
most metals, fiberglass, ceramics,
concrete, glass, leather and many plastics.

Whether you are making a structural repair to furniture,
creating craft items where durability is important,
this two part epoxy is an excellent choice.

Quick Cure is one of strongest glues available,
clear drying, gap filling, resilient, and extremely water resistant.

For onsite service and repairs the 50ml (1.6 Oz.) Syringe automatically
dispenses equal parts resin and hardener with a push of the plunger.

     Minimum Application Temperature: 40°F (5°C)

    Gel Time @ 77°F (25°C)  -  Working Time: 4-5 Minutes (30g mixture)

QuickCure-5, 50ml (1.6 Oz.) A & B Syringe
QuickCure-5
, 8 Ounce Kit - 4 Oz Part A  &  4 Oz Part B
QuickCure-5, 16 Ounce Kit (One Pint) - 8 Oz Part A & 8 Oz Part B

NOTE: For a little more assembly, positioning & clamping time we recommend the QuickCure-15.

Please enter quantities of desired items below then click

QC.50ml  -  System Three 5 Min. EPOXY (1.6oz.) 50ml Cartridge  -  $15.95  -  Quantity   
QC5.16  -  System Three 5 Minute EPOXY, 1 Pint Kit, 8oz of part A & B  -  $35.90  -  Quantity   

Please enter quantities of desired items above then click

SYSTEM THREE - T-88 EPOXY
Click the link above for Properties & more information
SYSTEMTHREE T-88 Structural EPOXY

System 3 T88 Epoxy
For well over 30 years T-88 has been the most widely used structural adhesive
for marine and general woodworking use in the United States.
T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted 
joints, and will cure in any thickness without shrinkage.
T-88 is clear amber and becomes virtually invisible when varnished.
Exhibiting outstanding adhesion and permanence on a wide variety of 
materials,
T8 is endorsed by leading designers, builders.

• Mix Ratio of 1:1 by volume
• Will cure at temperatures as low as 35F
• Unaffected by water, oil, kerosene, and many other chemicals when fully cured
• Immune to fungus and rot
• May be applied to damp wood when it is worked well into the surface

1/2 Pint Kit = 4 oz Part A & 4 oz Part B  • • •  One Pint Kit = 8 oz Part A & 8 oz Part B

Please enter quantities of desired items below then click

T88.8  -  System Three T88 EPOXY - 8 oz (1/2 Pint) Kit  -  $22.90  -  Quantity   
T88.16  -  System Three T88 EPOXY - 16 oz (One Pint) Kit  -  $34.95  -  Quantity   

Please enter quantities of desired items above then click

SYSTEM THREE -- G-2 Epoxy for Oily Hardwoods
Click Above for more information
SYSTEMTHREE G-2 Epoxy Glue for oily hardwoods
SystemThree - G2      Extended Working Time for Complex Glue-Ups
For over 35 years, G-2 Epoxy has been an excellent adhesive choice for oily,
acidic hardwoods like teak and other tropical woods. Use it for gluing oak
and cedar, as well as other materials that are difficult to bond.
G-2 was developed primarily for waterproof bonding
of rot-resistant woods used in fine yacht joinery.
Use G-2 for both interior and exterior applications
as well as below the waterline.
G-2 Epoxy:
   • Can be mixed in small or large batches
   • Has a long pot life   • Cures overnight.
   • No clamping pressure is required.
  
Working Time @ 70°F (21°C) -- 90 Minutes    Full Cure @ 70°F (21°C) -- 3 Days
After Full Cure G-2 can be machined, drilled, sanded and tapped.  --  12 Oz. Kit

G2.12  -  $26.95  -  Quantity   

paypal_logo_reflect.png