Shellac.net Wood Finish Supply & MeritIndustries.com
Home of: MohawkFinishSupply.com
Authorized Mohawk Distributor

Select Products for Furniture & Cabinet Finishes, Touch-Up, Repair, Maintenance
• • •
New Hours Visit Our Showroom 9:00 - 4:00 Monday - Thursday 2465 Second Street, Napa Ca 94559
Thank You for your support, we appreciate your business, Ron & Pete.



ABRASIVES / Sandpaper


LIBERON Oil Free STEEL WOOL
#0000, Ultra Fine STEEL WOOL - 1 Kg. (2.2 Pound) Roll & 250g. Sleeve
liberon_0000wool.jpgLiberon Steel Wool
Liberon Steel Wools
are produced using a high quality steel
to create crumble and dust resistant wool that is virtually oil free.
Use Liberon #0000 ‘Ultra Fine’steel wool for cleaning, preparing and maintaining wood and metal finishes, for polishing and cleaning delicate surfaces, including metals such as bronze, copper, chrome, stainless steel and aluminum, or with soapy water to clean and polish porcelain, marble and glass without marking. Cut back between coats of Shellac, French Polishes, Varnishes and paint or oil finishes.
The flexible #0000 ultra fine steel wool abrasive is ideal for applying wax polishes.
 
(Apply all waxes sparingly, in thin coats, and allow solvents to evaporate prior to buffing with a soft cotton cloth.) 


Grades:
Use #0000 ‘Ultra Fine’ steel wool for cleaning, preparing and maintaining wood and metal finishes, for polishing
and cleaning delicate surfaces including metals such as bronze, copper, chrome, stainless steel and aluminum
.
#00
Fine
is used for light cleaning and surface preparation & to cut back between coats of varnish, paint or oil finishes.
    Coarser Grades ON SALE
#0 Fine/Medium is suitable for cleaning, smoothing and preparing wood or metal surfaces before re-polishing, waxing, varnishing or painting. Grade #0 is recommended to use it with a suitable solvent for light to medium cleaning of all metals,
and Wax and Polish Remover to get rid of built-up wax polish, smoke and dirt on wood.
#1 Medium Fine steel wool is suitable for cleaning, smoothing and preparing wood or metal surfaces before re-polishing, waxing, varnishing or painting. It is recommended to use it with a suitable solvent for light to medium cleaning of all metals,
and Wax and Polish Remover to get rid of built-up wax polish, smoke and dirt on wood.
#2 Medium Coarse steel wool used for stripping and cleaning work. It can be used to remove rust, and is recommended
for use with Wood Strippers to remove softened polishes, varnishes, lacquers and paints from wood and metal surfaces.

#3 Coarse is excellent for use with finish remover on thick layers of finish and removal of heavy rust corrosion

CAUTION: Never tear steel wool. Cut to size with scissors or shears.
Always protect hands with gloves when handling the Liberon Steel wool.
KEEP AWAY from all sources of fire, sparks, and electricity including static electricity.
In the event of fire Extinguish steel wool with water. KEEP OUT OF REACH OF CHILDREN

Please enter quantities of desired items below then click

• SW40  -  Liberon Oil Free STEEL WOOL, 1 Kg. Roll - #0000 ULTRA FINE  -  $53.95  -  Quantity   
• SW240  -  Liberon Oil Free STEEL WOOL, 250 gr. Slv. - #0000 ULTRA FINE  -  $19.95  -  Quantity   
• SW220  -  Liberon Steel Wool, 250 gr. Slv. - #00 FINE  -  $15.90  -  Quantity   
• SW20  -  Liberon Steel Wool, 250 gr. - #0 FINE / MEDIUM  -  $9.50 $5.00 - On SALE !  -  Quantity   
• SW10  -  Liberon Steel Wool, 100 gr. - #0 FINE / MEDIUM  -  $6.95 $3.00 - On SALE !  -  Quantity   
• SW21  -  Liberon Steel Wool, 250 gr. Slv. - #1 MEDIUM  -  $9.00 $5.00 - On SALE !  -  Quantity   

Please enter quantities of desired items above then click

Steel Wool PADS
American STEEL WOOL PADS
American Steel Wool

 

These American steel wool pads
are a good choice for cleaning, stripping. and general shop use.

 

 16 pads in a poly-bag

Approximate weight per pack of 16 pads -- 230g  / 8 ounces

Please enter quantities of desired items below then click

• ASW.40  -  Steel Wool PADS, Red Devel #0000, SUPER FINE - 16 pads  -  $4.97  -  Quantity   
• ASW.30  -  Steel Wool PADS, Rhodes #000, EXTRA FINE - 16 pads  -  $4.97  -  Quantity   
• ASW.20  -  Steel Wool PADS, Rhodes #00, FINE- 16 pads  -  $4.97  -  Quantity   
• ASW.3  -  Steel Wool PADS, Red Devil #3 COARSE- 16 pads  -  $4.97  -  Quantity   

Please enter quantities of desired items above then click

SCOTCH BRIGHT PADS
SCOTCH BRIGHT PADS
scotch_brite_pads.jpg• Long lasting 3M pads.   • Large size 6" x 9"
Suitable for use on wood, metal, plastics, ceramics, porcelain, rubber,
or composites
. Reusable pads resist tearing, splintering, shredding,
loading and will never rust, providing a long, useful life
.
 
  • 7448, White - similar to steel wool grade #0000
 
• 7448, Gray - comparable to steel wool grade #00
  • 7447, Maroon - comparable to steel wool grade #1

Please enter quantities of desired items below then click

• 7448C  -  SCOTCH BRIGHT PADS, 07448 Ultra Fine, Gray - Box 20  -  $37.50  -  Quantity   
• 7448  -  SCOTCH BRIGHT PADS, 07448 Ultra Fine Gray - Pack of 4  -  $8.25  -  Quantity   
• 7447C  -  SCOTCH BRIGHT PADS General Purpose, Maroon - Box of 20  -  $37.50  -  Quantity   
• 7447  -  SCOTCH BRIGHT PADS General Purpose, Maroon - Pack of 4  -  $8.25  -  Quantity   
• 7445C  -  SCOTCH BRIGHT PADS (Light Duty Cleaning) White - Box of 20  -  $37.50  -  Quantity   
• 7445  -  SCOTCH BRIGHT PADS (Light Duty Cleaning Pad) White - Pack of 4  -  $8.25  -  Quantity   

Please enter quantities of desired items above then click

WOOL-LUBE - B730-1365 RUB Lubricant, Pint
Click above for Label & Information
WOOL-LUBE (Rub Lubricant)

Wool Lube

Wool-Lube (aka: Wool-Wax) is a specially formulated lubricant
for preparing furniture before
waxing and polishing.
Superior for removing pack marks, soiling, or fingerprints.

Furniture rubbed with Wool-Lube can be re-coated with lacquer with good adhesion.

Water soluble, non silicone and fast clean up.
Use as a lubricant when rubbing with pumice or rottenstone.
Use with steel wool, nylon pad, or, Wet or Dry paper. 

   -- Contains NO Wax, Oils or Silicone!
        
Pint Bottle


M720-1365  -  $16.39  -  Quantity   
PUMICE STONE (Powdered Abrasives)
Click above for Label Text & Directions
PUMICE STONE Abrasives

Pumice Stone


PUMICE Stone - 2F Powdered
(Medium Fine, #00)

Powered Pumice is used as an abrasive and in abrasive compounds for rubbing down
wood finishes.
When used for rubbing down finishes use water or rubbing oil
as a lubricant to control the finish rubbing.


PUMICE Stone - 4F - Powdered (Fine, #0000)
4F Pumice is used after the medium pumice rubbing and prior to rubbing
with rottenstone or fine rubbing and polishing compounds. Add water,
or rubbing oil, as a lubricant to control the cutting rate during final finish polishing.

Please enter quantities of desired items below then click

• M720-1202  -  PUMICE - 2F (MEDIUM) 1 Pound, Shaker Can  -  $11.35  -  Quantity   
• PSƒƒƒ  -  PUMICE - 3F (MEDIUM / FINE) 1 Pound (Dbl. Plastic Bag)  -  $9.95 $8.00 - On SALE !  -  Quantity   
• M720-1402  -  PUMICE - 4F (FINE) 1 Pound, Shaker Can  -  $11.35  -  Quantity   

Please enter quantities of desired items above then click

ROTTENSTONE B720-15006 (Genuine Gray) 1 Pound
ROTTENSTONE (Genuine Gray)
Rottenstone
New Shaker Top plastic canister.
Rottenstone is one of the finest polishing substances used for wood finish polishing 
to obtain a High Gloss sheen.
Use Rottenstone for a final gloss polish on
thoroughly cured lacquered, shellacked or varnished surfaces after first
rubbing with fine (4F) Pumice Stone.
Lubricate with Wool-Lube (or rubbing lubricant) to control and maintain
an even polishing action. Felt Blocks
or our Hard Rubber Block wrapped
in a 100% cotton cloth (white T-shirt material)are ideal for hand rubbing
with Pumice and Rottenstone polishing abrasives.


M720-1502  -  $12.95  -  Quantity   
FELT BLOCK - 2x4x1 in.
FELT BLOCKS (2"x4"x1")

Felt Blocks are used with pumice, rottenstone and rubbing compounds
to 
smooth & adjust the sheen of a fully cured finish,
and yield the classic hand rubbed look.

Keep a separate block for each rubbing grade.
Store separately to avoid grit or dirt contamination.

M902-1000  -  $16.95  -  Quantity   

CORK BLOCK - 2x4x1 in.
CORK BLOCK (2"x4"x1")

Cork is more aggressive than felt when used for rubbing finishes.


Use with Wool Lube™

and 600-800 Wet or Dry abrasive paper to
remove and level excess Burn-In Stick


M902-2000  -  $11.95  -  Quantity   

SANDING SPONGES
SANDING SPONGES Aluminum Oxide
sand_sponge.jpgFlexible to sand edges, in corners and grooves
Use wet or dry -- Rinse and reuse

Angled Sanding Sponge
4-7/8 in. x 3-1/2 in. x 1 in.
Beveled edges for tight corners

Sanding Sponge - 3-7/8 in. x 2-3/4 in. x 1 in.

Please enter quantities of desired items below then click

• CO-Pack  -  SANDING SPONGE Pack of 4 - 1 Coarse, 1 Medium, 2 Fine  -  $6.00  -  Quantity   
• CO-907  -  SANDING SPONGE, 3-7/8 x 2-3/4 x 1 - Fine  -  $1.59  -  Quantity   
• CO-908  -  SANDING SPONGE, 3-7/8 x 2-3/4 x 1 - Medium  -  $1.59  -  Quantity   
• CO-909  -  SANDING SPONGE, 3-7/8 x 2-3/4 x 1 - Coarse  -  $1.59  -  Quantity   
• CO-APack  -  ANGLED Sanding Sponge, Pack of 4 - 2 Fine, 1 Medium, 1 Coarse  -  $7.00  -  Quantity   
• CO-A07  -  ANGLED Sanding SPONGE, 4-7/8 x 3-1/2 x 1 in. - Fine  -  $1.79  -  Quantity   
• CO-A08  -  ANGLED Sanding SPONGE, 4-7/8 x 3-1/2 x 1 in. - Medium  -  $1.79  -  Quantity   
• CO-A09  -  ANGLED Sanding SPONGE, 4-7/8 x 3-1/2 x 1 in. - Coarse  -  $1.79  -  Quantity   

Please enter quantities of desired items above then click

SAND-O-FLEX - 350RP WHEEL
SAND-O-FLEX - 350RP Wheel
sandoflex_350rp.jpg
6" overall diameter wheel with 4" plastic body, 8 brushes
and 1" wide abrasive strip.


1/4" shank fits most electric hand drills.

 

Operating speed, MAX. 2400 RPM

Please enter quantities of desired items below then click

• 350-RP  -  SAND-O-FLEX WHEEL - 350RP, Plastic Body WHEEL  -  $58.65  -  Quantity   
• 13003  -  SAND-O-FLEX, Set of 8 Replacement Brushes for 350RP  -  $16.95  -  Quantity   
• 11055  -  SAND-O-FLEX WHEELS, Shank Adapter 1/4" to 1/2"  -  $13.00  -  Quantity   
• 12060  -  Sand-O-Flex 6" refills - 320 grit  -  $14.50  -  Quantity   
• 12059  -  Sand-O-Flex 6" refills - 240 grit  -  $14.50  -  Quantity   
• 12058  -  Sand-O-Flex 6" refills - 180 grit  -  $14.50  -  Quantity   
• 12056  -  Sand-O-Flex 6" refills - 120 grit  -  $14.50  -  Quantity   
• 12054  -  Sand-O-Flex 6" refills - 80 grit  -  $14.50  -  Quantity   
• 12053  -  Sand-O-Flex 6" refills - 60 grit  -  $14.50  -  Quantity   

Please enter quantities of desired items above then click

HARD RUBBER Sanding & Rubbing BLOCK
HARD RUBBER Sanding & Rubbing BLOCK
Rubber Block
The rubber block is always a flat surface. It will never swell or warp when wet,

and never shallow out a repair. Use with sandpaper or nylon abrasive pads for
uniform scuff sanding. Cover with Micro Mesh paper for hi-gloss finishes.
Cover the block with 100% cotton cloth for use with water or solvent based
compounds for buffing. Non porous, won't absorb grit, washes clean.

Sized to fit comfortably in the hand, 3 3/4 x 2 x 1 inches.

M902-3000  -  $17.95  -  Quantity   
3M WET/DRY - 220A
WET/DRY - 220A
Wet or Dry Sanding Sheets, 220A-Grit, 9-Inch x 11-Inch
  
   • Silicon carbide abrasive, a sharp synthetic mineral that cuts fast and smooth

   • Use with water or cutting oil to reduce clogging and extend abrasive life
   • Flexible "A" weight backing for contour sanding, or flat areas, for use by hand or with sanding block.

Please enter quantities of desired items below then click

• 99422.25  -  3M WET/DRY Pro-Pak 220A - 25 sheets  -  $30.98  -  Quantity   
• 99422.6  -  3M WET/DRY, 9x11 - 220A - 5 sheets  -  $7.50  -  Quantity   

Please enter quantities of desired items above then click

3M WET/DRY - 320A
WET/DRY - 320A
Wet or Dry Sanding Sheets, 320A-Grit, 9-Inch x 11-Inch

Please enter quantities of desired items below then click

• 99421.25  -  3M WET/DRY Pro-Pak 320A - 25 sheets  -  $30.98  -  Quantity   
• 99421.6  -  3M WET/DRY Pro-Pak 320A - 5 sheets  -  $7.50  -  Quantity   

Please enter quantities of desired items above then click

3M WET/DRY - 400A
 WET/DRY - 400A
Wet or Dry Sanding Sheets, 400A-Grit, 9-Inch x 11-Inch

Please enter quantities of desired items below then click

• 99420.25  -  3M WET/DRY, 400A Pro-Pak - 25 sheets  -  $30.98  -  Quantity   
• 99420.6  -  3M WET/DRY, 400A - 9x11 - 5 sheets  -  $7.50  -  Quantity   

Please enter quantities of desired items above then click

3M WET/DRY - 600A
WET/DRY - 600A
Wet or Dry Sanding Sheets, 600A-Grit, 9-Inch x 11-Inch

Please enter quantities of desired items below then click

• 99419.25  -  3M WET/DRY Pro-Pack 600A - 25 sheets  -  $30.98  -  Quantity   
• 99419.6  -  3M WET/DRY, 600A - 5 sheets  -  $7.50  -  Quantity   

Please enter quantities of desired items above then click

Index
 

paypal_logo_reflect.png