Wood Finish Supply &
Home of:
Authorized Mohawk Distributor

Select Products for Furniture & Cabinet Finishes, Touch-Up, Repair, Maintenance
• • •
Visit Our Showroom, 2465 Second Street, Napa Ca 94559
Thank You for your support, we appreciate your business, Ron & Pete.

Finisher's SHADING GLAZING STAIN • UPS Ground Only •

Mohawk / BEHLEN  Finishing Products
for Traditional Furniture Finishing, Repair and Maintenance

Shading & Glazing Stain

(M504 series) Shading & Glazing Stain has a specialized formula of highly concentrated colorants and topcoat friendly resins (to ensure good adhesion between the sealing
and finishing coats)
in a medium viscosity base.
This formula allows the finisher to create unique toning and
highlighting effects over almost any sealed surface.
Shading & Glazing Stains may be intermixed to adjust the color tone.
Oil Colors may be mixed & blended into Shading & Glazing Stain to create custom colors.
The Glazing Stain is compatible with almost any type of lacquer,
varnish, or urethane finish. This is a traditional Oil / Solvent based glaze.

Use the Clear Glaze Base to extend or lighten the color of the Shading & Glazing Stains.

Directions: Surface should be sealed with a sanding sealer or washcoat and sanded with 280 – 320 grit sandpaper before applying Glaze. Apply glaze liberally to the sealed surface using a glazing brush or rag, and allow it to set for a short period of time. Wipe to desired effect and color by removing excess glaze. Use a glazing brush to blend out harsh lines and achieve the desired effect.

For Highlighting: Use a cloth or 4/0 steel wool to remove additional Glaze
and to accent specific grain patterns after wiping the surface to a uniform color.
For best results, use a glazing brush to blend out and soften harsh glaze lines
to achieve the desired effect.

Caution: leaving too heavy a coat of Glaze may cause poor intercoat adhesion.
This Glazing Stain has good open time and can be recoated within 1 – 2 hours.

Note: For best results and to avoid wrinkling and other finish related problems,
Glazes must be top-coated within 6 hours of application.
  • • 
Application: Brush, Sponge or Rag.
  • • Clean Up: Paint Thinner or Mineral Spirits.

Raw Umber
Burnt Umber GlazeBurnt Umber
Black GlazeBlack
Raw SiennaRaw Sienna
Buent SiennaBurnt Sienna
Van Dyck Brown GlazeVan Dyck Brown
Dark Red Mahogany GlazeDk Rd Mahogany
Concentrate colors shown for comparison only, color rendering subject to computer monitor limitations.

Please enter quantities of desired items below then click

• M504-0006  -  Shade & Glaze, CLEAR BASE / Extender, Qt. • UPS Only •  -  $27.95  -  Quantity   
• M504-01436  -  Shade & Glaze, RAW UMBER, B514-8176, Qt. • UPS Only •  -  $27.95  -  Quantity   
• M504-14356  -  Shade & Glaze, BURNT UMBER, B514-8186, Qt. • UPS Only •  -  $27.95  -  Quantity   
• M504-4776  -  Shade & Glaze, RAW SIENNA, B514-8486, Qt. • UPS Only •  -  $27.95  -  Quantity   
• M504-4766  -  Shade & Glaze, BURNT SIENNA, B514-8476, Qt. • UPS Only •  -  $27.95  -  Quantity   
• M504-14786  -  Shade & Glaze, VANDYKE BROWN, B-8786, Qt • UPS Only •  -  $27.95  -  Quantity   
• M504-2276  -  Shade & Glaze, DK. RED MAHOGANY Qt. • UPS Only •  -  $27.95  -  Quantity   
• M504-2026  -  Shade & Glaze, WHITE. Qt. • UPS Only •  -  $27.95  -  Quantity   
• M504-2246  -  Shade & Glaze, BLACK, M504-2246, Qt. • UPS Only •  -  $27.95  -  Quantity   

Please enter quantities of desired items above then click