Mohawk Finishing Products
Division of RPM Wood Finishes Group, Inc.
Product Data Sheet
Pre-Catalyzed Clears (aerosols)
M102-0410 (Gloss), M102-0415 (Semi-Gloss), M102-0412 (Satin),
M102-0416 (Matte), M102-0411 (Flat), M102-0414 (Dead Flat)
Mohawk Pre-Catalyzed Clears offer the durability of a pre-catalyzed lacquer
with the ease of aerosol application.
The dry film is very durable and adheres where other finishes will not.
Pre-Catalyzed Clears have been tested and approved for in factory as well as
onsite touch-up on catalyzed finishes.
1. Excellent atomization.
2. Excellent adhesion.
3. Very good clarity and durability.
Weight per gallon: 6.36 lbs/gal * (including propellant)
Solids % (wt): 9.07 *
Solids % (vol): 5.53 *
Package viscosity: 23-25 seconds, #1 Zahn cup
Dry time: Air dry @ 72 F, 35% relative humidity
To touch: 7 minutes
To handle: 15 minutes
To package: overnight
PWR category: CCP
PWR Category limit: 1.5
PWR of product: 1.42*
*Includes propellant; values vary between colors
All values theoretical; not intended to be exact QC specifications.
Package life: 3 years
Sheen: Gloss: > 75, Semi-gloss: 60-65, Satin: 35-40, Matte: 20-25, Flat: 8-12, Dead Flat: 3-5
HMIS: Health – 2, Flammability – 4, Reactivity – 0, Personal Protection – X
Directions: SHAKE WELL for at least one minute after ball rattles.
Can temperature should be between 65° and 90° F.
Hold can 12 to 14 inches away from surface to be coated.
Press spray button firmly. Several thin coats work better than one heavy coat.
Clean spray button after use by turning can upside down and press spray button
until no more product comes out.
Stain if desired. Seal with Pre-Catalyzed Sealer M102-0413.
Dry ½ hour before sanding.
Apply Pre-Catalyzed Aerosol Lacquer.
Dry ½ hour. If needed, apply second coat.
FIRST, clean the repair area.
If repair is rough sand as necessary, seal and sand. Feather topcoat on evenly.
Safety and Other Precautions: Read MSDS for precautions before using product.