Shellac.net Wood Finish Supply & MeritIndustries.com
Home of: MohawkFinishSupply.com
Authorized Mohawk Distributor
Select Products for Furniture & Cabinet Finishes, Touch-Up, Repair, Maintenance
• • •
 New Hours Visit Our Showroom 9:00 - 4:00 Monday - Thursday 2465 Second Street, Napa Ca 94559
Thank You for your support, we appreciate your business, Ron & Pete
• • • • •
OPEN HOUSE Wood Finishing Discussions November 15th -- 9am - 1pm
Please Click here for details, and to confirm your attendance.

CHAIR & STOOL Replacement SWIVELS

MERITIndustries.jpg
  Swivels for new and replacement applications on chairs and stools.
Heavy Duty STAINLESS STEEL SWIVEL
Heavy Duty STAINLESS STEEL SWIVEL -- NEW !
stainless_steel_swivelDesigned for a manufacturer of outdoor furniture,
this Stainless swivel is the ultimate in longevity and strength.
Incorporates a full race nylon-ring bearings
(no steel balls that rust or fall out).
Suitable for marine or other outdoor use.
This stainless steel swivel is 20% stronger than conventional steel swivels. 

7″ Stainless Steel  -  Heavy Duty
Dimensions: 7x7in, 3/4 in Height, Mounting holes on 5-1/2 centers.
 
Made in the USA  One year warranty.

HDSSS  -  $48.95  -  Quantity   
3° Tilted Heavy Duty STAINLESS STEEL SWIVEL
Heavy Duty STAINLESS STEEL 3° Tilted SWIVEL -- NEW !
Stainless Swivel 3°7″ Extra Heavy Duty Stainless Steel 3° Tilted Swivel
(for chairs /stools with a back)
Developed for an Amish manufacturer of outdoor furniture,
this swivel is the ultimate in longevity and strength.
Our stainless steel swivels are 20% stronger than the
conventional steel swivels.
Incorporates full race nylon-ring bearings (no steel balls that rust or fall out).

Suitable for marine or other outdoor use. One year warranty.
HDTSS  -  $49.85  -  Quantity   
Polymer BAR STOOL SWIVEL
Polymer BAR STOOL SWIVEL - NEW !
polymer_swivel
Bar Stool Plates are made out of a space-age polymer material
that will never rust and will not break.
This lightweight swivel is specifically made for outdoor bar stools.
Incorporates a race nylon ring bearing (no steel balls that rust or fall out).
   •  Recommended for outdoor stools without backs.

   •  7 inch flat swivel (Actual 6.75x6.75) -- Height 15/16 in.
   •  Hole spacing - c/c along the side 5 in  -  5 5/8

   Made in the USA   1 year warranty.   Patent: US 7,806,380 B2

PBSS  -  $38.85  -  Quantity   

SWIVEL PLATE #118S, 10 inch - Heavy Duty
HEAVY-DUTY SWIVEL 10.25 inch - Flat Plate
HD10_swivel.jpg
Swivel plate for chairs, recliners, gliders
• BLACK Powder Coated
• 10 1/4” square, with holes 8” on center
• 7/8 in thick
• 49 steel Ball Bearings
• 500 lb. load limit
• sometimes called “Boat Chair Swivel"

- Made in the USA
118S  -  $49.95  -  Quantity   
SWIVEL PLATE #5088B, No Pitch - 8 in. Flat with Return Spring
SWIVEL PLATE, Flat 8 in., Return Spring - No Pitch BLACK 
No Pitch Flat swivel plate with “Memory Return” spring.
• similar to #4590 swivel plate
• Swivels 90 degrees Right or Left & Returns to Center.
• 42 Ball Bearingc   • Steel - BLACK Powder coated
• 5 3/4” center to center bolt pattern.
• 7.97 x 7.97 x 15/16 Thick (actual measure)
• Heavy duty, 500 lb. load limit - Stools or Chairs - Made in the USA

5088B  -  $38.95  -  Quantity   
SWIVEL PLATE #5083B, BLACK, 3°Pitch - 8 in., with Return
SWIVEL PLATE, 8 in. Return Spring - 3° Pitch, BLACK
3° Pitch swivel plate with “Memory Return” spring|
• For Stools or Chairs with a Back
• Swivels 90 degrees Right or Left & Returns to Center.
• 42 Ball Bearing
• Top Plate: Oval Slots allow a 6 in. min. & 7 in. max. center-to-center bolt pattern.
• Bottom Plate: Oval Slots allow a 5-3/8 min. to 7-1/8 max. center to center bolt pattern.
      Overall Size: 7-3/4 x 7-3/4 x 15/16 thick Rear & 1-3/8 thick Front.
• Heavy duty, 500 lb. rated   -- Note: Gloss Black coating NOT Shown here.
  - Made in the USA
5083B  -  $48.85 $45.95 - On SALE ! Quantity   
SWIVEL, Flat Replacement Plate #2A1286B
SWIVEL, Flat Replacement Plate #2A1286B (Black) (No Return Spring)
675flat_swivel.jpgReplacement Swivel for chairs
or stools with No Backs.
• 6 3/4” square, Flat, No Pitch
• 5 1/4” center to center bolt pattern.
• 3/4 inch thick    • Steel - unpainted finish
• 42 ball bearings for smoother action,
         more strength & longer life
 
••• Black Coating not shown on this current photo     • Commercial Duty, 500 lb. limit.
   - Made in the USA
2A1286B  -  $29.95  -  Quantity   
SWIVEL PLATE #2A1363, 6 3/4 in. 3° Pitch
SWIVEL PLATE - 3° Pitch - #2A1363 & #4630
2A1363-3degre.jpg
Swivel Plate for Chairs or Stools With Backs.
• 3 degree pitch
• 6 3/4 in. square
• 5 1/4 in. center to center bolt pattern
• Thickness at: Front, 1-1/8 - Back, 7/16 - Center, 1 inch
• Heavy Duty, 42 ball bearings   • Steel - unpainted finish
• 500 lb. load limit
  - Made in the USA
2A1363 / 4630  -  $27.60  -  Quantity   
SWIVEL PLATE #5128, No Pitch, 7 in. Flat with Return Spring
SWIVEL PLATE, Flat, with Return Spring - No Pitch 
4590_5128flat_swivel.jpg
  No Pitch FLAT Swivel Plate with “Memory Return” spring.
• 7-inch Square    • 11/16 Thick
• Swivels 90 degrees in Both directions & Returns to Center
• Mounting holes: 5.25 in. to 6 in on center.
• 51 Ball Bearing     • Steel - unpainted finish
• Commercial Duty, 500 lb. load limit - used by Casinos
  
   - Made in the USA
5128  -  $42.95  -  Quantity   
SWIVEL PLATE #5170, 7 in. with 3° Pitch & RETURN SPRING
SWIVEL PLATE with RETURN SPRING - 3° Pitch
5170-pitched-swivel.jpg 
  Swivel Plate, 3-degree pitch with “Memory Return” spring.
  For Seating with a Back
  (similar to #4630 swivel plate)
• swivels 90 degrees in both directions and returns to center
• Top of the swivel is marked “TOP”
• Commercial Duty, 500 lb. load limit 

   -  Made in the USA
5170  -  $37.95 $33.95 - On SALE ! Quantity   
SWIVEL PLATE #4480, 3° Pitch, 7 in. (Round Bottom Plate / 4 threaded holes)
Square Top plate, Round Bottom plate with 4 threaded bolt holes.
4480_front.jpg4480-back.jpg3 Degree Pitch for stools with a back.
Use 1/4”x 20 bolts to attach the round swivel plate
to the steel pedestal top on kitchen & dinette swivel chairs.
• Full nylon race & 12 bearings for durability and smooth ride.
• Bottom Plate 4 (1/4-20 thread) tapped holes on 2-1/2 inch centers.
• Top Plate 7 in square, slotted mounting holes on 5-1/4 in centers.
• Commercial Duty, 500 lb. load limit. - Made in the US

4480  -  $35.50 $33.00 - On SALE ! Quantity   

Shellac.net Wood Finish Supply / MeritIndustries.com
Authorized Mohawk Distributor
New Hours Visit us at: 2465 2nd St. Napa CA 94559 - 9:00 - 4:00 - Monday - Thursday - Closed Friday
Assistance for placing your order (9:00 am to 3:30 pm Pacific Time) 707-299-8016

Email: wfs@mcn.org ... Privacy Policy
rev. 10/25/25

Charge Cards

Index
 

Search
Your Account

paypal_logo_reflect.png