Finishing Products, Inc.
Product Data Sheet
BRIL-GLOW MILD ABRASIVE
M770-10006 - Quart
Mohawk’s “Bril-Glow” will clean, remove minor scratches,
and restore the original luster to older furniture.
With a few minutes of work furniture that has lost its new look
can be restored to its original beauty and aesthetic appeal.
This product contains no waxes, oils, or harsh abrasives and can be used on all shades of furniture.
1. Easy to use.
2. Quick results.
3. Removes fingernail scratches.
4. Removes old surface cloud.
1. Not a wax substitute.
Weight per gallon: 8.08 ± 0.1 lbs./gal.
Flashpoint: 105° F/ 41 c
Package viscosity: 2000 – 3000 cps
Volatile Organic Compounds (VOC): Not
To exceed 370 grams/liter, 3.1 lbs./gal.
Spec. Gravity: 0.971 ± 0.01
Boiling Range: 212° F/ 100 c
Non Volatile (wt): 38.9 ± 0.5%
Package Life: 2 years
Coverage: 500 square feet/gallon
Hazardous Air Pollutants: 0.0 lb./1 lb. solids
Air Quality Data: Non-Photochemically Reactive
Personal Protection: B
1. Shake well before using.
2. Pour Bril-Glow into a soft, lint-free cloth and rub vigorously in a circular motion over the entire surface.
3. Apply again, this time rubbing with the grain.
4. Remove residue by wiping with a clean, soft, lint-free cloth.
For best results, use only when product temperature is between 65° F and 90° F.
Contents are EXTREMELY FLAMMABLE. Vapors may ignite EXPLOSIVELY.
Keep away from heat, sparks and open flame. During use and until all vapors are gone, keep area well
ventilated. Avoid breathing of vapor and spray mist. USE ONLY WITH ADEQUATE VENTILATION.
Avoid contact with skin and eyes. Wash hands after using.
Keep container closed when not in use.
Do not transfer contents to other containers for storage.
KEEP OUT OF REACH OF CHILDREN