Shellac.net Wood Finish Supply &  MeritIndustries.com
Home of: MohawkFinishSupply.com
Authorized Mohawk Distributor

Select Products for Traditional Furniture Finishing, Touch-Up, Repair and Maintenance


Our showroom is now open - New Location - 2465 Second Street, Napa Ca 94559
Thank You for your support, we appreciate your business.
Ron, Pete & Shannon
 



Aerosol, CLEAR Lacquer for BRASS • UPS Ground Only •


Mohawk Finishing Products
Division of RPM Wood Finishes Group, Inc.

Product Data Sheet

LACQUER for BRASS (13 oz. aerosol)
M103-0500-Gloss,  M103-0540-Matte,  M103-0520-Satin


Product Description:
A CLEAR lacquer for metals such as brass. The lacquer contains
an anti-tarnish additive to keep metals bright, clean and new looking longer.
Mohawk’s “Lacquer for Brass” will show excellent adhesion
on a variety of metals such as; brass, bronze, nickel, silver, tin, aluminum etc.
This product will maintain the high gloss brilliance of plating including chrome.

Advantages:
1. Easy to use.
2. Quick drying.
3. Tarnish resistant formula.
4. Good wear properties.

Characteristics:

Weight per gallon: 6.49 lbs/gal (including propellant)
Solids % (wt): 7.37
Solids % (vol): 4.35
Dry time:
Air dry @ 72 F, 35% relative humidity

To touch: 7 minutes
To handle/recoat: 15 minutes
To package: overnight
PWR category: CRB
PWR Category limit: 1.8
PWR of product: 1.066*
*Includes propellant
Package life: 3 years
Sheen: Gloss: > 90,  Matte - 20, Satin - 40
HMIS: Health – 2, Flammability – 4, Reactivity – 0, Personal Protection – X

Specifications:

Directions:
SHAKE WELL BEFORE USING. Make sure surface is free of dirt, grease, etc.
Use drop cloth or newspapers to protect surrounding areas from spray mist.
For best results, use only when can temperature is between 65 and 90F.
Shake can vigorously for at least one minute after ball rattles to ensure color uniformity and prevent clogging. Point opening of spray button toward object, holding can 12 to 14 inches away from surface to be coated.
Press spray button firmly. Use steady even strokes while spraying.
Several thin coats give a better finish than one heavy coat. Allow coating to become tacky between coats.
Clean spray button immediately after use by turning can upside down and pressing spray button for 5 seconds or until no more product comes out. If clogging develops, remove spray button with a twisting motion and clean. NO NOT stick
pin or other object into can.
Gently replace button with a twisting motion with top of can and spray button pointed away from you. \
Discard empty can in trash pick-up.
DO NOT place in home compactor or burn.


Safety and Other Precautions: Read MSDS for precautions before using product.


Please enter quantities of desired items below then click

• M103-0500  -  Aerosol, CLEAR Lacquer for BRASS - GLOSS • UPS Only •  -  $8.39  -  Quantity   
• M103-0540  -  Aerosol, CLEAR Lacquer for BRASS - MATTE • UPS Only •  -  $8.39  -  Quantity   
• M103-0520  -  Aerosol, CLEAR Lacquer for BRASS - SATIN • UPS Only •  -  $8.39  -  Quantity   

Please enter quantities of desired items above then click


 

paypal_logo_reflect.png