|
|
Hot Stuff SUPER "T" (YELLOW Label) Cyanoacrylate Glues
SUPER T Yellow Label
Printer Friendly: Guidelines and Use Instructions
 For parts that don't fit perfectly use SUPER T (YELLOW Label), it's thicker,
takes a bit longer (25 seconds) to cure, and has the ability to fill small gaps
between bonding surfaces.
Also used on porous or soft woods where "Hot Stuff' might soak in too quickly
for a good bond. For pitchy oily woods such as Teak, or hard to bond surfaces,
prepare /clean the surface with NCF Accelerator as directed.
• Shelf Life: 1 year
• For clean-up use Super Solvent
Note: Choose SPECIAL T (GREEN Label) for even greater gap-filling
ability, or when a slow cure (60 seconds) will allow for re-aligning of parts
after you place them together.
Always Use Eye Protection
|
HOT STUFF instant glue (RED Label) Cyanoacrylate Instant Glues
Printer Friendly: Guidelines and Use Instructions
HOT STUFF Red Label
Use original Hot Stuff (RED Label) when the pieces you're gluing fit well.
 With a consistency close to water, it bonds in as little as 5 seconds!
Red Label is particularly useful for preparing stock for wood turning,
closing up natural cracks in wood. Use for bonding wood, stone, glass,
leather, rubber and metal, and many plastics.
For parts that don't fit perfectly use Super T (Yellow Label). It's thicker, takes a bit longer (25 seconds) to cure, and has the ability to fill small gaps between bonding surfaces.
Choose Special T (Green Label) for even greater gap-filling ability, or when
a slow cure (60 seconds) will allow for re-aligning of parts after you put them together.
For pitchy, oily, or hard to bond surfaces, prepare /clean the surface with NCF Accelerator as directed. • Shelf Life: 1 year • For clean-up use Super Solvent
-- ALWAYS Use Eye Protection
|
Hot Stuff SPECIAL "T" (GREEN Label) Cyanoacrylate Glues
SPECIAL T Green Label
Printer Friendly: Guidelines and Use Instructions
Choose SPECIAL T (GREEN Label) for even greater gap-filling ability,
or when you want a cure slow enough (60 seconds)
to allow for re-aligning of parts after you put them together.
For pitchy, oily, or hard to bond surfaces, prepare /clean the surface with NCF Accelerator as directed.
For a faster bond use SUPER T (YELLOW Label), it's medium thick, about (25 seconds)
to cure, and has the ability to fill small gaps between bonding surfaces.
• Shelf Life: 1 year
• For clean-up use Super Solvent
Always Use Eye Protection
|
NCF Quick - CA Glue Accelerator - Aerosol UPS Only
NCF Quick - CA Glue Accelerator
 Accelerators dramatically decrease the curing time of the glue and force the glue
to cure when it wouldn't otherwise. NCF Quick is less expensive per ounce, has a more pleasant odor than the others, and comes in a 6oz aerosol can for easy application.
NCF accelerator is active for several minutes, so you can spray several pieces
at once if you are making multiple bonds.
If you get the part wet, you are applying too much. NCF Quick is plastic-safe and foam-friendly.
|
|
|
|
|
|
|
|
