Shellac.net Wood Finish Supply / MERIT Industries.com
Select Products for Traditional Furniture Finishing, Touch-Up, Repair and Maintenance


DRAWER, TABLE, FURNITURE Parts

MERITIndustries.jpg


WOOD DROP LEAF SUPPORT - One Pair, (NOS)
DROP LEAF SUPPORT, Wood
wooddropleaf_supports.jpgPull-Out type drop leaf support for tables without aprons.
Bracket for fastening directly to top provided as part of support.

(NOS) New Old Stock (20 inches long).
Sold in pairs only.

29  -  $12.95  -  Quantity   
DROP LEAF SUPPORT, Steel
DROP LEAF SUPPORT
steel_drop_leaf_support.jpg
• Made from heavy gauge steel
• Support is held open by spring tension
• Spring action avoids accidental collapse.

• Plain finish

Pack of One (1) Support

Please enter quantities of desired items below then click

• 557-8  -  DROP LEAF SUPPORT, Steel, 1 support - 8 inch  -  $3.25  -  Quantity   
• 557-10  -  DROP LEAF SUPPORT, Steel, 1 support - 10 inch  -  $3.75  -  Quantity   

Please enter quantities of desired items above then click

DRAWER OUTSTOPS
DRAWER OUTSTOPS
drawer_outstop.jpg

 Drawer Outstops mount on the back of a drawer to prevent its being pulled out accidentally.

To remove the drawer, tip the outstop forward and slide the drawer out.
To reinsert, push the drawer all the way in and the outstop will snap into position.


Please enter quantities of desired items below then click

• 51-423  -  DRAWER OUTSTOPS - Pack of 4  -  $1.00  -  Quantity   
• 51-423-25  -  DRAWER OUTSTOPS - Pack of 25  -  $5.50 $4.00 - On SALE !  -  Quantity   

Please enter quantities of desired items above then click

RECTANGULAR DRAWER GLIDES
RECTANGULAR DRAWER GLIDES

drawer_glides.jpg

For many smaller, lightweight drawers these simple tack-in drawer glides may be all that is needed.
They install in seconds, creating a smooth low-friction surface that reduces wear.
Retro-fit older wood glides and provide a friction free surface for drawers to glide on.

The plastic Glide surface measures 11/16" x 1/2" x 3/32'' thick.

Please enter quantities of desired items below then click

• DG-8113-C  -  Rectangular DRAWER GLIDES, 1/16 inch Thick - 100  -  $4.00  -  Quantity   
• DG-8113-4C  -  Rectangular DRAWER GLIDES, 1/16 inch Thick - 400  -  $13.00  -  Quantity   
• DG-8114-C  -  Rectangular DRAWER GLIDES, 1/8 inch Thick - 100  -  $4.25  -  Quantity   
• DG-8114-4C  -  Rectangular DRAWER GLIDES, 1/8 inch Thick - 400  -  $15.00  -  Quantity   

Please enter quantities of desired items above then click

DRAWER GLIDE - CORNER TACK
CORNER TACK DRAWER GLIDE

 

Corner Glides help center the drawer and protects wooden glide surfaces.
Install in seconds, creating a smooth low-friction surface that reduces wear.
Retro-fit older wood glides and provide a friction free surface for drawers to glide on.


Please enter quantities of desired items below then click

• CTG-162-C  -  Drawer Corner TACK GLIDE, Pkg. 100  -  $7.80  -  Quantity   
• CTG-162-4C  -  Drawer Corner TACK GLIDE, Pkg. 400  -  $24.90  -  Quantity   
• CTG-162-M  -  Drawer Corner TACK GLIDE, Pkg. 1,000  -  $59.00  -  Quantity   

Please enter quantities of desired items above then click

DRAWER GLIDES - METAL
DRAWER GLIDES - METAL
metal_tack_drawer_glides.jpg
Makes drawers slide with ea
se.


Please enter quantities of desired items below then click

• DG-716-C  -  DRAWER GLIDES, 7/16" METAL, Pack of 100  -  $2.50  -  Quantity   
• DG-716-4C  -  DRAWER GLIDES, 7/16" METAL, Pack of 400  -  $7.00  -  Quantity   

Please enter quantities of desired items above then click

STEEL DRAWER SLIDES
STEEL DRAWER SLIDES
• Stocked in 14" or 16" lengths
• Side or bottom mount, delrin with steel ball bearing, no shimmy design.

Please enter quantities of desired items below then click

• D6415T/F-14  -  STEEL DRAWER SLIDES 14"  -  $4.00  -  Quantity   
• D6415T/F-16  -  STEEL DRAWER SLIDES 16"  -  $4.50  -  Quantity   

Please enter quantities of desired items above then click

WOOD DRAWER Center GUIDES 21" w/support bracket
WOOD DRAWER Center GUIDES
Complete Set, male and female sections includes metal support bracket.
wood_drawer_guide.jpg
• Two, easy to attach sections.
• Crafted from high quality seasoned hardwood.
• 21" Long, may be cut down to desired length.

• Intelocking dovetail prevents drawer tipping when extended.
• No Pre-drilled holes allows for custom instillation


WWS21  -  $8.40  -  Quantity   
DRAWER GUIDES, Back Bearing
DRAWER GUIDES, Back Bearing
40-25_rear_guide.jpg

 

Replacements for conventional center-guided drawers,
use will greatly improve drawer action at little cost.

The self lubricating polyethylene is durable
and reduces the effort required to slide a drawer.

Please enter quantities of desired items below then click

• 40-25.2  -  BACK BEARING, Drawer Guides (2)  -  $0.60 $0.45 - On SALE !  -  Quantity   
• 40-25-25  -  BACK BEARING GUIDES - 25  -  $10.00 $6.50 - On SALE !  -  Quantity   

Please enter quantities of desired items above then click

BACK BEARING, Drawer Guides (staple on)
BACK BEARING, Drawer Guides (staple on)


Used for conventional center-guided drawers will greatly improve drawer action at little cost.

The self lubricating polyethylene is durable and reduces the effort required to slide a drawer.


Staple on, or drill for selected fasteners.

Guide #44.28

Please enter quantities of desired items below then click

• 40-28.2  -  Back Bearing Drawer Guides, staple, Two  -  $0.57 $0.40 - On SALE !  -  Quantity   
• 40-28.25  -  Back Bearing Drawer Guides, staple, 25 ea.  -  $6.75 $4.50 - On SALE !  -  Quantity   

Please enter quantities of desired items above then click

TABLE LEAF / Sash Lock
TABLE LEAF / SASH LOCK




Lock table leaves together with draw tightening action.

     Bright Brass Finish

155  -  $2.25  -  Quantity   
TABLE LEAF GUIDES 3/4" x 1 1/2" - Pack of 100
TABLE LEAF Leveler GUIDES
table_leaf_levelers.jpgForged steel
3/4" X 1 1/2"

Attach to apposing bottom sides of leaf and table to align the top


 Pack of 100
TG-150  -  $6.95  -  Quantity   

TABLE PINS
TABLE PINS
table-pins.jpg

Wooden table pins
3/8 in. diameter.

Plastic Pins 5/16 in. & 3/8 in. diameter.


Please enter quantities of desired items below then click

• WTP38  -  WOOD TABLE PINS 3/8" - Bag of 100  -  $6.00 $4.00 - On SALE !  -  Quantity   
• WTP38.25  -  WOOD TABLE PINS 3/8" - Bag of 25  -  $1.75 $1.00 - On SALE !  -  Quantity   
• R-25-80  -  TABLE PINS 5/16", Plastic - Bag of 100  -  $5.00 $2.70 - On SALE !  -  Quantity   
• R-25-81  -  TABLE PINS 3/8", Plastic - Pack of 100  -  $5.00 $2.70 - On SALE !  -  Quantity   
• R-25-81.25  -  TABLE PINS 3/8", Plastic - Pack of 25  -  $1.50 $0.75 - On SALE !  -  Quantity   

Please enter quantities of desired items above then click

PANEL RETAINER BUTTONS
PANEL RETAINER BUTTONS

Made to firmly hold a panel that is recessed into a frame.
Requires no machining for the retainer.
Glass can be removed for cleaning.
A screw is needed for installation and is included with the button.

For thin Glass use the PRB-202,TAN
or,  PRB-180, CLEAR
Recessed Panel Retainers #'s 180 & 202 are ideal for panels recessed 1/8"

Please enter quantities of desired items below then click

• PRB-180  -  PANEL RETAINER BUTTON - CLEAR, #180 - Box of 100  -  $8.95  -  Quantity   
• PRB-180-5C  -  PANEL RETAINER BUTTON - CLEAR, #180 - Box of 500  -  $40.00  -  Quantity   
• PRB-202  -  PANEL RETAINER BUTTON, #202 - Brown, Box of 100  -  $8.95  -  Quantity   
• PRB-202-5C  -  PANEL RETAINER BUTTON, #202 - Brown, Box of 500  -  $40.00  -  Quantity   
• PRB-200  -  PANEL RETAINER BUTTONS, PRB-200, CLEAR, Pack of 100  -  $8.95  -  Quantity   

Please enter quantities of desired items above then click

CHAIR BRACES
CHAIR BRACES
bronze_corner.jpg


Braces chair where leg meets the seat.

• Stops wobble in old chairs

2 sizes


Please enter quantities of desired items below then click

• 341B  -  CHAIR BRACE, Statuary Bronze - 1 inch, Pack of 12  -  $6.00  -  Quantity   
• 341B-C  -  CHAIR BRACE, Statuary Bronze - 1 inch, Pack of 100  -  $45.00  -  Quantity   
• 342B.SB  -  CHAIR BRACE, Statuary Bronze - 2 inch, Pack of 12  -  $10.50  -  Quantity   
• 342B.SB-C  -  CHAIR BRACE, Statuary Bronze - 2 inch, Pack of 100  -  $69.00  -  Quantity   
• 342B  -  CHAIR BRACE, Zinc Plated - 2 inch, Pack of 12  -  $10.50  -  Quantity   
• 342B-C  -  CHAIR BRACE, Zinc Plated - 2 inch, Pack of 100  -  $69.00  -  Quantity   

Please enter quantities of desired items above then click

Cabinet CATCHES, DOUBLE ROLLER
DOUBLE ROLLER CATCHES
Double Roller Catch
The Statuary Bronze Double Roller Catch with spear strike provides smooth
tight grip action that fastens cabinet doors securely.
Helps keep kitchen and bathroom cabinets closed.
The smooth plastic rollers provide a firm noiseless grip.

Double Roller Catches are easy to install with the provided screws.

   • Double roller self-adjusting catch.

   • Steel base material with nylon rollers.
   • Statuary bronze finish.
   • Self-aligning arms work independently for easy installation.
   • Roller catch design to close securely without a magnet.

Please enter quantities of desired items below then click

• 88.1  -  Cabinet CATCHES, DOUBLE ROLLER - 1 Set  -  $0.90  -  Quantity   
• 88.2  -  Cabinet CATCHES, DOUBLE ROLLER - 2 SETS  -  $1.55  -  Quantity   
• 88-D  -  Cabinet CATCHES, DOUBLE ROLLER - 12 Sets  -  $7.50  -  Quantity   
• 88-HB  -  Cabinet CATCHES, DOUBLE ROLLER HIGH BASE - 1 Set  -  $1.15  -  Quantity   
• 88-HB-D  -  Cabinet CATCHES, DOUBLE ROLLER HIGH BASE - 12 Sets  -  $9.50  -  Quantity   

Please enter quantities of desired items above then click

MAGNETIC CATCHES
MAGNETIC CATCHES
   • Magnetic Catch.
   • Durable Plastic Construction in tan.
   • Includes mounting screws.

Please enter quantities of desired items below then click

• 81SP  -  MAGNETIC CATCHES, Beige Plastic - 1 Set  -  $0.75  -  Quantity   
• 81SP-D  -  MAGNETIC CATCHES, Beige Plastic - 12 Sets  -  $7.95  -  Quantity   

Please enter quantities of desired items above then click

Authorize.Net Merchant - Click to Verify
Email: sales@meritindustries.com Or orders@shellac.net ... Ordering Information ... Privacy Policy

paypal_logo_reflect.png