Mohawk Finishing Products, Inc.
Product Data Sheet
Liquid RUBBING COMPOUNDS - Level II (Medium to High Sheen)
M730-0106 (Step 1), M730-0206 (Step 2), M730-0306 (Step 3)
Available in Quarts
• • • • •
Product Description:
The Mohawk Level II Rubbing Compounds: Step 1, 2 & 3 series will produce a
medium to high sheen on coatings such as lacquers, shellac, varnish, etc.
Step #1 through #3 are formulated with finer abrasives than our Level I compound.
Step #3 being the finest and producing the highest sheen in Level II.
Advantages:
1. Semi Paste form.
2. Quick clean-up.
3. Creates a polished look.
4. Can be used with hand or machine buffing.
Product Limitations:
1. For medium to high sheen gloss.
--------------------------------------------
Characteristics:
Weight per gallon: 8.75 ± 0.1 lbs./gal.
Flashpoint: 143 F/62 c Spec. Gravity: 1.05 ± 0.01
Boiling Range: 132 F/56 c
Package Life: 2 years
HMIS:
Health: 1
Flammability: 2
Reactivity: 0
Personal Protection: B
Specifications:
Directions:
Procedures for Machine Buffing:
Surface must be clean and thoroughly dry.
Shake compound well before using.
Apply enough compound to work a two foot square section.
Buff with clean pad using light pressure.
Reduce pressure as compound begins to dry.
Wipe off residual with clean soft cloth.
Procedure for Hand Buffing:
Surface must be clean and thoroughly dry.
Shake compound well before using.
Apply compound with soft, lint-free cloth.
Buff in a circular motion until dry.
Wipe off residual with a clean soft cloth.
Safety Cautions:
Contents are EXTREMELY FLAMMABLE. Vapors may ignite EXPLOSIVELY.
Keep away from heat, sparks and open flame. During use and until all vapors are gone, keep area well
ventilated. Avoid breathing of vapor and spray mist. USE ONLY ADEQUATE VENTILATION.
Avoid contact with skin and eyes. Wash hands after using.
Keep container closed when not in use. Do not transfer contents to other containers for storage.
KEEP OUT OF REACH OF CHILDREN
| 
