 |
|
View Full HTML Site |
|
|
|
|
MOHAWK WOOD FINISHING PRODUCTS |
 
An Integrated System of Compatible Materials for Professional Finishing Results.
NEWS Blog 
|
|
|
|
|
|
|
|
|
|
|
|
BRUSH, SABLE TOUCH-UP
Sable TOUCH UP BRUSHES
Touch-Up Brushes are used for for blending and color correcting spot background fill-ins and
touch-up repairs with Blendal Furniture Powders and 2 Minute Repair Liquid.
|
BRUSH, SABLE GRAINING / TOUCH-UP
Sable GRAINING BRUSHES
A select brush for adding fine grain lines to spot finish repairs with Furniture Powders and the 2 Minute Repair Liquid.
|
BRUSH, Sable GRAINER #3585 Series
Sable GRAINER Brush (#3585 Series)
Round ferrule Dull Black Wood Handle, ideal for laying in missing grain.
Overall length ... 6.75 - 7in.
|
TWO MINUTE REPAIR LIQUID, Quart UPS Only
TWO MINUTE TOUCH-UP REPAIR Brushing Liquid
TWO MINUTE TOUCH-UP REPAIR Brushing Liquid
is a special formula, clear, quick drying, brush-on,
touch-up repair finish.
TWO MINUTE TOUCH-UP may be used to create
a permanent stain repair by mixing with Blendal Furniture Powders.
Create a quick drying graining liquid
by reducing the Touch-Up with Lacquer Thinner.
|
LACOVER PADDING FINISH UPS Only
Click above for Data & Application Information
LACOVER PADDING FINISH
 For spot color repair and refinishing.
The most widely used “French Polish” padding finish in the world.
Specially formulated for use with Mohawk Blendal® Powder Stains.
Compatible with most known finishes.
In one operation, the stain and finish can be replaced on worn or bare spots.
Available in two solids #30 and #50.
Use the #30 Solids when a minimum build is desired.
The higher the solids #50, takes less time to build a finish and complete the job.
Also recommended for leather and vinyl. “Highlight” effects can be created
on wood, leather or vinyl materials with this method Lacover® Padding Finish
imparts new life to leather, prevents cracking and drying out.
|
|
|
|
|
|
|
|
|
|
|
BLENDAL Furniture TOUCH-UP POWDERS (MOB Powders)
Click above for the Color Guide
BLENDAL Furniture Powders(aka Touch-Up Powders & MOB Powders)
Blendal touch-up powders are used with a touch-up brush
& Two Minute Repair Liquid, Qualasole, or Wipe on Water Base Urethane
to color correct and blend finish repairs.
Also; To color Epoxy, mix the pigment into the A part then add the B part and mix well.
See: COLOR THEORY for the Furniture Finisher & Woodworker
 Brown Mahogany
M370-2291
|
Lt Walnut
M370-2061
|
Ex Dk Walnut
M370-2091
|
 Cherry
M370-4081
|
 White
M370-2021
|
 Black
M370-2241
|
 Blue
M370-4141
|
 Green
M370-4131
|
 Red
M370-2421
|
 Yellow
M370-2031
|
Burnt Sienna
M370-4761
|
 Raw Sienna
M370-4771
|
 Raw Umber
M370-01431
|
 Burnt Umber
M370-14351
|
 Champagne
M370-3351
|
 Med Brn Walnut
M370-2071
|
 Van Dyck Brown
M370-14781
|
 Rock Maple
M370-2251
|
 Blonde
M370-2221
|
 Dk Red Mahogany
M370-2271
|
 Perfect Brown
M370-2491
|
 Yellow Ochre
M370-3481
|
 Lt Golden Oak
M370-4151
|
 Pine
M370-15161
|
Colors shown for comparison only, color rendering subject to computer monitor limitations.
|
|
|
|
|
Ultra Penetrating NGR Dye & Solar-Lux RETARDER UPS Only
Ultra Penetrating NGR DYE & Solar-Lux RETARDER
NGR (non grain raising) DYE RETARDER
slows evaporation and drying of NGR Dyes to give more working time
and improve penetration, especially on hard dense woods.
With the newer Dye VOC Compliant formulation,
use of the NGR DYE RETARDER is HIGHLY RECOMMENDED
especially for dye application by hand.
|
Transparent DYES - NGR (Non Grain Raising) UPS Ground Only
Click above for Application Information - Click here to see the: NGR DYE Color Guide & Listing
Solar-Lux / Ultra Penetrating NGR (Non-Grain Raising) Transparent DYE
Excellent fade & UV resistance. NGR Transparent Dyes
are used alone on bare wood or to provide a base tone of color
on which to build a final finish color with stains, glazes, and toners.
Dyes contain NO Pigment Particles and therefore
color wood without emphasizing the grain structure.
Intermix colors to arrive at custom color tones.
• For use on bare or stripped wood.
• Reduce color with NGR Reducer (M520-00017), or Acetone.
• Use NGR RETARDER to slow drying and improve penetration,
especially in hot weather or on harder dense woods.
• Mix into Lacquer or Shellac to make transparent tints or toners.
With the newer VOC Compliant formulation,
use of NGR RETARDER is HIGHLY RECOMMENDED for penetration
and to extend open working time, especially for dye application by hand.
• • • • •
The Deep JET BLACK (Behlen Formula) is back In Stock
Please Click Here to See the: NGR DYE Color Guide & List
Please Note: If the factory packages a color in Pints we list and stock it.
If not shown in our listing, the factory does not package that color in pints.
ALL NGR Dys are available in GALLONS,
Please Phone to order NGR Dye in Gallons not listed below.
|
|
|
Finisher's SHADING GLAZING STAINS UPS Ground Only
Important: Click above for Application Information
Mohawk SHADING & GLAZING STAIN
 FINISHERS GLAZE™ SHADING & GLAZING STAINS are
a special blend of concentrated colorants and topcoat friendly resins
(to ensure good adhesion between sealing and finishing coats)
in a medium viscosity base.
The formula allows the finisher to create unique toning
and highlight effects over almost any sealed surface.
Compatible for use with conventional and modern catalyzed finishes
as well as conversion varnishes and urethanes.
Use on a sealed surface, when using as a glaze.
View or Print PDF Glaze Application Informaton
Concentrate colors are shown for comparison only, color rendering subject to computer monitor limitations.
 Raw Umber
M504-01436
|
 Burnt Umber
M504-14356
|
 Black
M504-2246
|
 Raw Sienna
M504-4776
|
 Burnt Sienna
M504-4766
|
 Van Dyck Brown
M504-14786
|
 Dk Rd Mahogany
M504-2276 |
|
WOOD GRAIN FILLERS UPS Ground Only
WOOD GRAIN FILLER (Paste Wood Filler)
 A classic Solvent based formula, compatible with almost all sealers and topcoats.
Mohawk Grain Filler is used for filling open grained woods.
A fine blended mixture of silica, pigments, provides a smooth,
glass-like surface for subsequent finishing coats.
Must be thinned with Filler Reducer (depending on the wood grain) for use.
Finer grained woods will require a thinner mix than more open grained species.
Use over a wash coat of sealer. Tint or tone with oil colorants.
•• Our Grain Filler Spreader / Leveler is advised for even filling.
A 24-hour dry time is necessary before top-coating.
In general, a ratio of 4 parts Grain Filler to 1 part Reducer is recommended. - Quart Cans
 Natural
M608-4206
|
Med Brn Walnut
M608-4226 |
 Mahogany
M608-4236 |
 Black
M608-4216 |
Please See: Grain Filler Instructions: Printer Friendly PDF file
|
|
|
|
|
WATER BASED Paste Wood Filler / GRAIN FILLER
Water Base Grain Filler
 Mohawk Water Base Grain Filler has been designed to create a professional smooth,
closed grain surface on open grain woods like oak, mahogany and cherry.
It applies easily, levels smoothly, dries quickly (usually in 2 to 3 hours), excellent
for filling end grain, and sands to a finishing grit smoothness.
Accepts any waterborne or solvent base stain or finish.
Allow overnight dry time if using solvent base stains and finishes.
Mohawk Water Base Paste Wood Grain Filler is environmentally friendly.
It is low in VOC’s, nonflammable, and cleans up with warm water and detergents.
Use waterborne or UTC pigments to make additional color tones. -- Quarts.
|
Rockhard TABLE TOP Urethane VARNISH UPS Ground Only
Click link for Product Data
Rockhard™ TABLE TOP Urethane VARNISH (Gloss & Satin)
 Rockhard™ Table Top Urethane Varnish
is the coating of choice when you want a hard finish
that will deliver maximum resistance to water, alcohol,
food stains, chemicals, detergents, and other damaging liquids.
Its toughness also makes Rockhard suitable for many other uses
like wooden chairs, benches, desks, dressers, chests of drawers,
vanities, bookcases, and many more.
REDUCER & for Cleaning Brushes or tools use Mineral Spirits.
|
SALAD BOWL FINISH CLEAR UPS Ground Only
Click above for Application Information
SALAD BOWL FINISH Clear Click For: Printer Friendly Application Information / Data Sheet
Mohawk, Behlen Salad Bowl Finish is specially formulated to allow the
following statement. "This product contains FDA regulated ingredients
complying with 21 CFR 175.300." and therefore achieves a non-toxic,
safe for food contact (in its cured state) finish. Salad Bowl Finish has the
application ease of an oil finish (use a clean white cloth) and the film building
and sheen producing (up to a satin) qualities of a varnish.
Wooden bowls, wooden utensils, butcher block counters when finished
with Salad Bowl Finish may be used in contact with foods.
Child safe for use on toys, recreational objects (games, puzzles), and infant furniture.
(NOT intended for use on cutting boards or chopping blocks)
|
|
|
|
| |
|
