 |
|
View Full HTML Site |
|
|
|
|
MOHAWK WOOD FINISHING PRODUCTS |
 
An Integrated System of Compatible Materials for Professional Finishing Results.
NEWS Blog 
|
|
|
|
WAX WASH Cleaner & WAX REMOVER UPS Only
To: Info & Label Text
WAX WASH DE-WAXER WOOD CLEANER
 WAX WASH / De-Waxer Wood & Finish CLEANER
& WAX REMOVER is a specially formulated blend of solvents.
For best repair and rub-out results, first prepare and clean the surfaces with
WAX WASH / De-Waxer to remove waxes, oil and other foreign material
from bare woods, new finishes, and aged wood finishes.
Wax deposits that remain after the use of paint, lacquer, and varnish removers
can be eliminated with use of WAX WASH / De-Waxer
Available: Quart M712-1906 & Aerosol M107-0190
|
POUR-N-WIPE / Master Gel FINISH UPS Only
Click above for Label Text & Product Data
POUR-N-WIPE FINISH (M603-3016) / Behlen Master Gel (B550-30016)
A (solvent / oil based) top coat for bare, dyed or stained wood.
• Unique gel form • Easy-to-apply • No mess, no brush marks
• Pour-N-Wipe® Finish is self sealing • Excellent as a wood turning finish.
Pour-N-Wipe is self-sealing (no sealer coat is required) and virtually colorless when dry.
Imparts a lustrous satin urethane finish to wood, protecting against water and alcohol staining.
Clean up: Mineral Spirit.
Pour-N-Wipe is durable enough for use on hardwood floors, bar and table tops.
Pour-N-Wipe Finish can be applied with a lint free cloth.
Dries overnight. Allow to dry 4 hours prior to re-coating.
For Best Results: The work area, surface being finished, Pour-N-Wipe should be above 60°f
Maintain 60 degrees throughout the dry time of the coats.
Colder temperature can affect flow and dry times.
|
FNISH UP Polyurethane
Click above for Data & Application Information
FNISH-UP™ Wipe-On Polyurethane (Waterborne Wipe On)
Finish Up is a waterborne (WATER CLEAR) user friendly wipe on finish.
Mohawk Finish-Up™ Polyurethane can be applied over repairs such as
Burn-Ins, Fil-Stik® Putty Stick fills, Blendal® Powders and Touch Up
Markers to seal in the repair, leaving a durable protective finish.
Apply over properly cleaned existing finishes to improve appearance
and durability. Finish-Up™ Polyurethane adheres well to most types of lacquers,
vinyl clads, and high pressure laminates as well as many other substrates.
Best of all, it is water based and has almost no odor.
The almost no odor feature makes Finish-Up™ Polyurethane the product of choice
where aerosols and other solvent based touch up finishes are not appropriate.
• Low VOC 380 g/l • Easy Wipe On application • Quick Drying • Good Flow characteristics • Good Durability
• Moisture & Alcohol Resistant • Water Clear • Excellent Adhesion • Won't Lift other finishes • Nonflammable
|
|
|
|
|
|
|
|
|
E-Z VINYL Lacquer SEALERS - CLEAR, BLACK & WHITE UPS Ground Only
Click link above for Data Sheet
E-Z VINYL LACQUER SEALERS - CLEAR, BLACK & WHITE
VINYL SEALERS develop an excellent moisture resistant barrier for the wood substrate, and provides a good tough, and flexible base for all lacquer finishes.
Vinyl Sealer is offered in a ready to use formulation
that needs no further reduction or catalyst.
• • • 5 Gallon Pails available on Order. Please Phone to order.
Note: Vinyl Sealer may be applied over raw wood or filled and stained substrates.
Clear also available for Aerosol applications
|
CAB/ACRYLIC CLEAR TOPCOAT Lacquer
CAB/Acrylic CLEAR TOPCOAT
 Mohawk CAB (Cellulose Acetate Butyrate) Acrylic Topcoat
is a 275 VOC maximum compliant, self-sealing coating that provides a clear,
non-yellowing film that is perfect to topcoat interior wood surfaces.
It is the best choice for light colored stains and may be applied
over pigmented lacquer colors because it does not yellow with age.
• Passes KCMA standard testing and works great on cabinets
• Will not yellow or amber
• No re-coat window or pot life
• No mixing or reduction necessary • Fast drying
|
Finishers Choice LACQUER SANDING SEALER UPS Only
Finisher's Choice™ LACQUER Sanding SEALER
This Nitrocellulose sealer produces a smooth, hard, clear,
seal coat as a foundation for lacquer topcoats.
Finisher's Choice™ Sanding Sealer is light in color and high in solids.
Formulated for maximum adhesion, superior hold-out,
and exceptional flow-out properties.
Finisher's Choice™ Sealer dries within forty-five minutes and may be used
under any lacquer topcoat except the acrylics and shellacs.
5 Gallon Pails Available on Order. - Please Phone to Order.
Use Lacquer Reducer / Thinner for reduction (Not Over 15% recommended).
|
Finishers Choice CLEAR LACQUERS UPS Ground Only
Click above for Product Data Sheet & application information
Finisher's Choice™ CLEAR LACQUERS - 275 VOC compliant (Alcohol Resistant)
Mohawk’s Finisher's Choice™ clear nitrocellulose lacquers are
highly resistant to the strongest of alcohols, water, moderate heat,
abrasion, impact, and are highly scratch resistant after a week's cure time.
Finisher's Choice™ lacquer forms a hard film designed to take
punishment that would normally ruin other lacquers.
It may be used on tabletops and other applications that require a tough finish.
Finisher's Choice™ Clear Lacquers are ready to spray, high solids, low viscosity formulas that enables users to achieve the best flow and build without reduction.
Apply in light, even coats of no more than 3-4 wet mils.
Clear WW Lacquers are 275 VOC compliant. -- Solids % (wt): 20.14
|
DURACOAT Pre-Catalyzed Lacquer UPS Ground Only
DuraCoat PRE-CATALYZED LACQUER
Mohawk DuraCoat® Pre-Catalyzed Lacquers are premium quality finishes
for furniture, kitchen and bath cabinets, and for mill-work.
DuraCoat® feature high solids, moisture resistance, good flexibility,
mar resistance, with more durability than regular nitrocellulose lacquers.
When used over our vinyl sealer or high solids pre-catalyzed sealer,
DuraCoat® produces an exceptional Cabinet finishing system and passes KCMA testing.
550 VOC Compliant. -- Solids 25%.
Apply in light, even coats of no more than 3-4 wet mils. If a second coat is desired; scuff sand with 320 grit stearated sandpaper apply in light, even coats. Total film build of the entire system, including topcoats, should not exceed 4 dry mils.
Excessive build may lead to poor adhesion, cracking or cold check problems.
|
BUFFCOTE LACQUER (Waxing Lacquer)
Click above: Product Data Sheet & Application Information
BUFFCOTE™ LACQUER (Satin & Matte)
 Buffcote™ (aka Waxing Lacquer) contains waxes that yields dazzling results for all types of fine furniture and interior woodwork. This unique lacquer delivers a very soft look and feel that will "wow" your customers and is formulated to give a hand rubbed waxed effect right off the spray gun.
Buffcote Lacquer is used as a Top-Coat only over Finishers Choice gloss lacquer.
The slightly amber appearance of Buffcote Lacquer also adds to the patina and richness of the wood. Buffcote offers quick dry, quick build, and exceptional flow and leveling.
Buffcote looks great over stained wood or, alone as a beautiful natural finish.
Solids: 27% --- Matte (20) sheen - - 5 gallon pails are special order
|
CRACKLE LACQUER UPS Ground Only
CRACKLE LACQUER
 Crackle Lacquer creates a cracked, crazed, or antique looking finish.
A wet coat of Crackle Lacquer is sprayed over a dried nitrocellulose colored base coat.
The base color shows through when the crackle layer cracks.
For example, black over white yields white visible in the cracks
and clear over white simulates an antique white enamel finish.
Effective only when a wet coat is applied with a spray gun over a
conventional gloss lacquer finish. Crackle is offered in a ready to spray consistency.
The clear can be colored with lacquer colorants to create dynamic results.
|
MOHAWK Opaque COLORED LACQUERS
COLORED LACQUER
Mohawk Colored Lacquers are pigmented, nitrocellulose based coatings.
They are fast drying with excellent flow, build and hiding characteristics.
Colored Lacquers may be applied over a variety of interior wooden surfaces
including furniture, molding and musical instruments.
For best results apply over a freshly sanded E-Z Vinyl® Colored Sealer.
Reduce with Mohawk Lacquer Reducer 2255. No catalyst needed.
Warning: Not recommended for use in high moisture areas such as kitchens and bathrooms.
Solids: 31%.
|
LACQUER REDUCER / THINNER 2255 UPS Only
PLEASE Click Above for Additional Information
LACQUER REDUCER - MOHAWK / Finishes Edge Lacquer Thinner 2255
 A special blend of solvents formulated for thinning nitrocellulose lacquers.
Use to thin:
• Lacquer Sanding Sealer
• Vinyl Lacquer Sanding Sealer
• Mohawk Nitrocellulose Lacquers
• Classic Stringed Instrument Lacquer.
Thinner improves flow of lacquers and adjusts viscosity for the spray equipment used.
(Avoid using more than 15 % by volume of the lacquer)
Note: 5 Gallon Pails are PICK-Up or DELIVERY Only - Please Phone ahead
Information Sheet, View or Print: Solvents For Your Lacquer Finishes
|
|
|
|
|
CLASSIC Stringed INSTRUMENT LACQUER UPS Ground Only
Click above: Label Text & Application Information
CLASSIC Stringed INSTRUMENT Lacquer
Classic Stringed Instrument Lacquer is a high quality 80 gloss sheen
nitrocellulose lacquer specifically designed for wooden stringed instruments.
Stringed Instrument Lacquer allows for the special expansion and contraction
that occurs due to the unique construction of stringed instruments.
Note:
Stringed Instrument Lacquer must be applied over our Vinyl Sealer in order
to assure its unique film building and special finish characteristics.
Also available in Aerosol --
For a Higher Gloss (90 Sheen) we recommend our Piano Lacquer
|
|
|
|
|
DANISH FINISHING OIL UPS Only
Click above for Data & Application Information
DANISH FINISHING OIL
 Danish Oil Finish is formulated and recommended for use on Teak wood,
 Monkeypod, Zebrawood, Rosewoods and other similar hard dense woods.
Danish Oil penetrates the wood and dries hard unlike linseed oil and
most other finishing oils which become tacky when exposed to heat.
This polymerized wood finish, combines penetrating oils with resins to produce a natural oil finish on unfinished wood. One application seals and finishes wood. Never gums up in warm temperatures. Will not print and is non-greasy.
Water spots, stains, burns and scratches are easily removed by buffing
with 4/0 steel wool and Danish Oil.
Avoid Spontaneous Combustion - Dispose of rags properly.
|
|
|
PUMICE STONE (Powdered Abrasives)
Click above for Label Text & Directions
PUMICE STONE Abrasives
PUMICE Stone - 2F Powdered (Medium Fine, #00)
Powered Pumice is used as an abrasive and in abrasive compounds for rubbing down
wood finishes. When used for rubbing down finishes use water or rubbing oil
as a lubricant to control the finish rubbing.
PUMICE Stone - 4F - Powdered (Fine, #0000)
4F Pumice is used after the medium pumice rubbing and prior to rubbing
with rottenstone or fine rubbing and polishing compounds. Add water,
or rubbing oil, as a lubricant to control the cutting rate during final finish polishing.
|
|
|
DENATURED ALCOHOL (Behkol) Shellac Reducer UPS Only
Click above for more info About Denatured Alcohols:
DENATURED ALCOHOL / Shellac Reducer
DENATURED ALCOHOL, Mohawk Shellac Reducer (formerly Behlen Behkol),
is formulated specifically to dissolve shellac flakes and dilute or 'cut' liquid Shellacs.
See the: Shellac Pound Cut Mixing Chart
Denatured Alcohol, Shellac Reducer (formerly labeled Behkol) will make a shellac that has
a little more open or 'working time', a good solvent choice for mixing your own shellac.
Also used to dissolve alcohol Aniline Dyes.
• 5 Gallon pails are Pick-Up, or North Bay Delivery Only.
Call to place 5 gallon orders & arrange details.
Note: The SAME PRODUCT in 1 & 5 Gallon packaging now carries the Mohawk 'Finishers Edge' label.
|
MINERAL SPIRITS UPS Only
MINERAL SPIRITS
Mineral Spirits are a petroleum distillate;
used for reducing oil base color concentrates,
stains, and varnishes.
5 Gallon Pails Pick-Up or Delivery Only,
To Place Order, Phone 877-245-5611
|
|
|
|
| |
|
