SYSTEM THREE - QUICK CURE 5 MINUTE EPOXY
SYSTEMTHREE QuickCure 5 Minute EPOXY

Use QuickCure-5 epoxy adhesive when strong, fast bonds
are required on wood, most metals, fiberglass, ceramics,
concrete, glass, leather and many plastics.
Whether you are making a structural repair to furniture,
creating craft items where durability is important,
this two part epoxy is an excellent choice.
Quick Cure is one of strongest glues available,
clear drying, gap filling, resilient, and extremely water resistant.
For onsite service and repairs the 50ml (1.6 Oz.) Syringe automatically
dispenses equal parts resin and hardener with a push of the plunger.

Minimum Application Temperature: 40°F (5°C)
Gel Time @ 77°F (25°C) - Working Time: 4-5 Minutes (30g mixture)
QuickCure-5, 50ml (1.6 Oz.) A & B Syringe
QuickCure-5, 8 Ounce Kit - 4 Oz Part A & 4 Oz Part B
QuickCure-5, 16 Ounce Kit (One Pint) - 8 Oz Part A & 8 Oz Part B
NOTE: For a little more assembly, positioning & clamping time we recommend the QuickCure-15.

SYSTEM THREE - T-88 EPOXY
Click the link above for Properties & more information
SYSTEMTHREE T-88 Structural EPOXY
System 3 T88 Epoxy

For well over 30 years T-88 has been the most widely used structural adhesive
for marine and general woodworking use in the United States.
T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage.
T-88 is clear amber and becomes virtually invisible when varnished.
Exhibiting outstanding adhesion and permanence on a wide variety of materials,
T8 is endorsed by leading designers, builders.

• Mix Ratio of 1:1 by volume
• Will cure at temperatures as low as 35F
• Unaffected by water, oil, kerosene, and many other chemicals when fully cured
• Immune to fungus and rot
• May be applied to damp wood when it is worked well into the surface

1/2 Pint Kit = 4 oz Part A & 4 oz Part B • • • One Pint Kit = 8 oz Part A & 8 oz Part B

SYSTEM THREE -- G-2 Epoxy for Oily Hardwoods
$26.95
G2.12
Click Above for more information
SYSTEMTHREE G-2 Epoxy Glue for oily hardwoods
SystemThree - G2

      Extended Working Time for Complex Glue-Ups
For over 35 years, G-2 Epoxy has been an excellent adhesive choice for oily,
acidic hardwoods like teak and other tropical woods. Use it for gluing oak
and cedar, as well as other materials that are difficult to bond.
G-2 was developed primarily for waterproof bonding
of rot-resistant woods used in fine yacht joinery.
Use G-2 for both interior and exterior applications
as well as below the waterline.
G-2 Epoxy:
   • Can be mixed in small or large batches
   • Has a long pot life   • Cures overnight.
   • No clamping pressure is required.
   • Working Time @ 70°F (21°C) -- 90 Minutes • Full Cure @ 70°F (21°C) -- 3 Days
After Full Cure G-2 can be machined, drilled, sanded and tapped. -- 12 Oz. Kit
Quantity

QuickWood EPOXY PUTTY STICK
Click Above: Application Information & Data
QuickWood EPOXY PUTTY STICKS - aka 'Tootsie-Roll' Epoxy

"Quick Cure" Epoxy Putty Sticks are ideal for repairs of table tops, edges of furniture, carvings and turnings.
It can be used as a replacement for Burn-In or Wax Fill Sticks, when a more durable repair is needed. Wood Epoxy is a specially formulated two part wood repair epoxy which is hand mixed or (kneaded) to a uniform color to create an extremely durable repair.
Wood epoxy has the same density as wood, and upon curing becomes an integral part of the item being repaired. To use, clean and roughen the area to be repaired. Cut off the amount required and knead to a uniform color. Apply firmly into the spot to be repaired, force into cracks or voids, remove any excess, and form as close to the required shape as possible. Wood epoxy has a 10-minute work life and hardens in 15 minutes. It may be sanded, carved, drilled or stained after the product is cured.
Full cure is achieved in 24 hours.

Pine M743-1510	White M743-1520	OAK / Light Walnut M743-1530	Cherry / Mahogany P-929
	Black M743-1570	Natural / Maple P-900	Walnut M743-1560

BLENDAL Furniture TOUCH-UP POWDERS (MOB Powders)
Click above for the Color Guide
BLENDAL Furniture Powders(aka Touch-Up Powders & MOB Powders)

Blendal touch-up powders are used with a touch-up brush
& Two Minute Repair Liquid, Qualasole, or Wipe on Water Base Urethane
to color correct and blend finish repairs.

Also; To color Epoxy, mix the pigment into the A part then add the B part and mix well.

See: COLOR THEORY for the Furniture Finisher & Woodworker

Brown Mahogany M370-2291	Lt Walnut M370-2061	Ex Dk Walnut M370-2091	Cherry M370-4081	White M370-2021	Black M370-2241
Blue M370-4141	Green M370-4131	Red M370-2421	Yellow M370-2031	Burnt Sienna M370-4761	Raw Sienna M370-4771
Raw Umber M370-01431	Burnt Umber M370-14351	Champagne M370-3351	Med Brn Walnut M370-2071	Van Dyck Brown M370-14781	Rock Maple M370-2251
Blonde M370-2221	Dk Red Mahogany M370-2271	Perfect Brown M370-2491	Yellow Ochre M370-3481	Lt Golden Oak M370-4151	Pine M370-15161