|
|
MERIT BURN-IN STICKS (Hot Patch Sticks) Half Length
 New Item - Half Length BURN-IN STICKS
A traditional Shellac Burn-In (hot melt) Stick made from the finest shellacs and resins.
Ideal for use on older shellac finishes and for fine antique repairs.
Used for chip, dent, and hole repairs on wood, stone, & marble.
Accepts any type of topcoat, low heat will not lift or swell the repair.
(Made in the USA by Merit Industries) - - New Length 3 3/8 in x 1/2 x 3/8
Single Half Length Sticks - $3.59 ea.
(Click Here) For a list of Full Length Sticks by COLOR NUMBER
|
SINGLE FILL NATURAL BRISTLE BRUSH - Shellac & Varnishes
• NEW Item
SINGLE FILL NATURAL BRISTLE BRUSHES
2 inch brush pictured
Single Fill Natural Bristle Brushes
• These are well crafted Single Thick Shellac, Varnish, & multi-purpose brushes.
• 100% premium natural un-dyed, un-bleached, 90% tops, flat trimmed hog bristles.
• Bristles are secured in the heads with a 2 part epoxy for solvent resistance.
• Plated ferrules. • Smooth unfinished Beech wood handles.
NOT Recommended for use with waterborne finishing materials.
Made in the USA
• • • Click on a brush price-line to see the bristle specifications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brush, GOLDEN TAKLON Synthetic Bristle - 2700 series
Brush, GOLDEN TAKLON - 2700 series
• Wood Handles 5"- 6" - Metallic lacquered silver color.
• Glued, and crimped to brush ferrules for no loose connections.
• Total brush length 7" to 8..55" depends on size.
• Set of 3 = 1/2, 3/4 & 1 inch
• Set of 4 includes: Set 3 & the New 1-1/2 inch bush
 - New 1.5in.Wide, 8.75 Overall, Handle 5in.
|
BLOXYGEN FINISH PRESERVER
Click Above, for the can label and more information
Bloxygen Finish Preserver for Unused Finishing Materials
STOP throwing away partially used oil paints and varnishes - Use Bloxygen
 Bloxygen uses ultra pure Argon, the natural inert gas
drives the oxygen and moisture from the container.
Simply blow the oxygen out of the container with Bloxygen,
then seal the lid.
The heavy, inert Bloxygen gas sinks down and blocks oxygen
from the liquid surface. Because Bloxygen is heavier than air,
it will seal the liquid from any air that may remain in the container.
• Recommended for oil / solvent based products.
• Up to 75 uses per aerosol. • NOT for use with latex or lacquer products.
• Non-flammable • Non-toxic • Contains argon
Is BLOXYGEN expensive?
It Is NOT expensive, BLOXYGEN lasts for about 75 uses for quart cans.
If you save just one half of a $24 quart of varnish, you've paid for your BLOXYGEN.
The next 74 uses are "free!"
|
GRAY Fil-Sticks
 GRAY FIL-STICKS
Quickly and easily eliminate scratches, nicks or abrasions on wood furniture,
picture frames, plastics and paneling with these semi-hard filler sticks.
No heat or special tools required. Simply rub the wax stick in damaged areas to fill.
Scrape excess filler off using a credit card to leave an even, smooth surface.
Fil-Sticks work well on most wooden surfaces in low use areas.
Fil-Sticks can be protected with aerosols or other top coatings.
 PEBBLE  NEBULOUS  GUN METAL
|
SEA SPONGES
Clink link above for more information
NATURAL SEA SPONGES
The perfect and preferred sponges for faux finishing.
Native to the waters of Florida, sea sponges are 100% natural and biodegradable.
Use for faux finishing, marbleizing, texturing, sponge painting, pottery, ceramics, staining, dye application, paint stippling and more.
Natural Sea Yellow Sponges are collected from the warm clear waters of Rock Island, Florida, Gulf coast. A durable and soft sponge of good quality. The divers collect these sponges with great care, preserving the ocean bed for lasting and fruitful harvest year after year.
|
|
|
|
|
|
