Product Data Sheet
Flash-Off™ Control Solvent
M716-5007 - Gallon / M716-5006 - Quart
Product Description:
Mohawk Flash-Off™ Control Solvent improves the flow of lacquers
without substantially affecting the overall drying of the system.
Only a few ounces of Flash-Off™ Control Solvent per gallon of lacquer are needed
to eliminate over spray roughness in the finish.
Advantages:
1. Improves system flow.
2. Eliminates over spray and orange-peel.
3. Does not extend dry time with recommended amounts.
Characteristics:
Weight per gallon: 6.78
Solids % (wt): 0.0
Solids % (vol): 0.0
VOC’s (coating): 6.76 lbs/gal ( 812.0 g/l)
VOC’s (material): 6.76 lbs/gal ( 812.0 g/l)
VHAP’s: 2.0% by weight (0.136 lbs/gal)
Package life: 3 years
All values theoretical; not intended to be exact QC specifications.
HMIS: Health – 2, Flammability – 3, Reactivity – 0, Personal Protection -X
Directions:
Add 3 to 5 ounces per gallon in all Mohawk nitrocellulose,
pre-catalyzed lacquer and post-catalyzed lacquer coatings.
More may be added up to10% by volume if needed but it will increase dry time.
Do not add to water base lacquers or conversion varnishes.
Notes:
Addition of Flash-Off ™ Control Solvent will lower viscosity and excessive amounts will increase dry time.
Use as only as needed to correct the over spray and orange-peel issues.
Safety and Other Precautions: Read MSDS for precautions before using product.
Information Sheet, View or Print: Solvents For Your Lacquer Finishes