Salad Bowl Finish Clear

    Salad Bowl Finish
    has been specially formulated to meet government standards of CFR21, 175.300
    to create a nontoxic, safe for food contact (in its cured state) finish.

    Salad Bowl Finish has the application ease of an oil finish (just use a clean white cloth)
    and the film building and sheen producing (up to a satin) qualities of a varnish.

    Salad Bowl Finish may be applied to wooden:
    • Furniture (Highchairs, Cribs, Etc.)
    •     Utensils (Spoons)
    • Butcher Block Counters -     NOT for use on surfaces used for cutting or chopping.
    (For Cutting & Chopping Boards, Butcher Blocks, and bare wood Salad Bowl
    use a block oil such as     Terra Nova NaturOil )
    • Food Service Platters
    • Sushi Platters
    • Infant Furniture, High Chairs
    • Recreational Objects (Games, Puzzles, Childrens Toys) &, of course, Salad Bowls

    Salad Bowl Finish     is a specially formulated finish with the application ease of an oil finish
    and the sheen building and resistance properties of a varnish. Wooden bowls, wooden utensils,
    counter tops and recreational related objects (games, puzzles, etc.) when finished with
    Salad Bowl may be used in contact with foods.
    * It's great for furniture too!

    Procedure To Apply Salad Bowl Finish:

  1. Sand Wood to 320 grit smooth.
  2. Remove all dust with tack cloth or vacuum hose.
  3. Apply Salad Bowl Finish to wood with lint free white cloth.
  4. Apply one thin, uniform coat.
  5. Allow 6 hours dry time before recoating, lightly scuff sand with 400 grit sandpaper.
  6. To recoat, repeat steps 2 through 5.
  7. Apply enough coats to thoroughly seal the surface,
  8. softer or open pore woods may need several coats.
  9. Allow 24 hours prior to rubbing with nylon mesh pad or 4/0 Steel Wool.
  10. Allow at least 72 hours curing prior to use with food.
  11. Clean-up with Mineral Spirits.
  12. To insure that materials coated with Salad Bowl Finish
    may be used in contact with food, you must do the following:
    1. Apply to raw (non-stained) wood.
    2. Use as is (Salad Bowl Finish is a ready to use product), do not add reducers.
    3. Use only additional coats of Salad Bowl Finish to build a finish
      (do not apply over other finishes).
    4. Wait at least 72 hours, observing proper curing conditions,
      to allow all detectable traces of the Mineral Spirits solvent to evaporate.

H. BEHLEN & BRO. Salad Bowl Finish meets government standards
of CFR21,175.300 to create a nontoxic, food safe (in its cured state) finish.

Behlen Clear Salad Bowl Finish
Pint B603-00015 12.98
Quart B603-00016 19.98
For Wood Cutting & Chopping Boards,
Butcher Blocks, and bare wood Salad Bowls
use a block oil such as Terra Nova NaturOil

Shellac.net Wood Finish Supply
Return to: Finish Supply Home Page ... Return to: Shellac.net
Comments to author: wfs@woodfinishsupply.com
All contents copyright (C) 1996-2011, Wood Finish Supply. All rights reserved.
Revised:2/17/11 ... URL; http://shellac.net/SaladBowl.html