GOOF OFF Pro Stripper Aerosol
Perfect for refinishing furniture and floors
How to use:
1 - Wear chemical-resistant gloves and chemical splash goggles.
2 - Shake well and hold can in an upright position approximately 12″ to 14″ from surface.
3 - Using a back-and-forth motion, apply a generous but even coat of remover to one small area at a time (up to 9 sq ft) because health safety risks will increase dramatically when used over large areas.
4 - Do not rush job – allow time for product to work.
5 - Test a small area to see if finish is ready for removal
6 - Scrape off loosened finish by gently working in the direction of wood grain with a chemical-resistant plastic scraper.
7 - Repeat if necessary.
Caution: Always test on an inconspicuous area first, as every hard surface is different. Damages many plastics, worn vinyl floors, some automotive paints, and some carpets.
Caution: DO NOT use to Strip Bathtubs --------------------------------------------
Caution: DO NOT Use in Enclosed Areas
WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer, and Methanol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www. P65Warnings.ca.gov.
|