Mohawk Finishing Products, Inc. -- Product Data Sheet
FINISH UP POLYURETHANE
M603-410 (GLOSS), 420 (SATIN), 440 (FLATT)
Available in pints and quarts
Product Description:
Mohawk’s Finish Up is a unique wipe-on low VOC protective finish.
Finish Up is an excellent product as a coating over repairs made with putty sticks, burn-ins and the like.
It is a very durable finish that can be mixed and used with Blendal powders.
This material is quick drying, durable and provides excellent adhesion over many surfaces.
Advantages:
1. Non-flammable
2. Easy to use.
3. Will not lift other finishes.
4. Quick wipe-on application.
5. Good durability and water clear.
Product Limitations:
1. Designed for interior use only.
|
Characteristics: HMIS: |
Spec. Gravity: 1.04 ± 0.01 Non Volatile (wt.) 19-20% Depending upon gloss
Air Quality Data: Non-Photochemically Reactive
Hazardous Air Pollutants: 0.02 max lb./1 lb. solids |
Specifications:
Directions:
Surface should be clean, dry and wax free. Fine sand lightly. Shake well before using.
Finish-Up may be applied using a soft cloth or pre-dampened cellulose sponge.
For small area touch-up, apply Finish-Up to the applicator material.
Wipe damaged area in the direction of grain in three to four passes using a padding like motion.
For larger area application, wet applicator generously and wipe with the grain.
Repeated wiping will lead to a dulling effect. Recoat, if needed after one hour.
Allow overnight drying.
Clean up with warm tap water.
Safety Cautions:
USE ONLY WITH ADEQUATE VENTILATION.
Avoid contact with skin and eyes. Wash hands after using.
Keep container closed when not in use.
Do not transfer contents to other containers for storage.
KEEP OUT OF REACH OF CHILDREN