Mohawk Product Data Sheet
Finishing Products, Inc.
FINISHER’S CHOICE CLEARS
M102-0540 (GLOSS), M102-0541 (SATIN), M102-0542 (FLAT), M102-0543 (SEALER)
Available In 13 OZ. Aerosol
Product Description:
Mohawk’s highest solids aerosol product line. Available in three different sheens for the topcoat
and a sanding sealer to compliment the hi-solids quality of the topcoats.
This product is very suitable for small refinishing and restoration projects.
Advantages:
1. HAP’s compliant.
2. Aerosol form – no extra equipment needed.
3. Fast build.
4. Very good flow.
5. Excellent blush resistance.
Product Limitations:
1. For interior use only.
------------------------------------------------------------
Characteristics:
Dry time:
Air Dry @ 72 F, 35% relative humidity
To touch: 5 minutes
To handle: 15 minutes
To sand: 30 minutes
To recoat: 30+ minutes
To package: Overnight
Volatile Organic Compounds (VOC):
Does not exceed 95% VOC
60° Gloss Meter Readings:
Gloss: 85+
Satin 45-50
Flat 15-20
Spec. Gravity: .913 ± 0.01
Boiling Range: -30 F/-34 c
Non Volatile (wt): 16.7 ± 0.3% (Sealer), 18.3 – 19.8% for Topcoat
Package Life: 3 years
Hazardous Air Pollutants: 0.75 ± 0.05 lb./1 lb. solids
Air Quality Data: Non-Photochemically Reactive
HMIS:
Health: 1
Flammability: 4
Reactivity: 0
Personal Protection: B
Specifications:
Directions:
SHAKE WELL BEFORE USING. Surface should be clean, dry, finish sanded with a wood moisture
content of 6-8% maximum. For best results, use only when can temperature is between 65 °F and 90°F.
Use steady even strokes while spraying. Several thin coats give a better finish than one heavy coat.
Safety Cautions:
Contents are EXTREMELY FLAMMABLE. Vapors may ignite EXPLOSIVELY.
Keep away from heat, sparks and open flame.
During use and until all vapors are gone, keep the area well-ventilated.
Avoid breathing of vapor and spray mist. USE ONLY WITH ADEQUATE VENTILATION.
Avoid contact with skin and eyes. Wash hands after using.
KEEP OUT OF REACH OF CHILDREN
Rev. 1/21/23