White Pickling Stain
Can Label Text
BEHLEN White Pickling Stain is formulated to produce a pickled (whitewash) look.
The gel consistency and controlled drying time provides good workability.
Tint with oil pigment colors.
Surface must be clean dry and finish ready (sanded to 150 - 220 grit).
On porous words a light coat of sealer will inhibit absorption
and allow better color control (sand sealer lightly prior to applying the stain).
Apply with a lint free cloth and wipe off excess.
Allow stain to dry for 4 hours before re-coating or top coating with solvent-based finishes.
Allow 24 hours drying prior to applying a water base finish.
Some finishes (sealers & topcoats) may appear to discolor the whiteness of the stain.
Always do a sample panel first to see the result of the finish system
before starting the actual project.
Some stain movement may occur if topcoat is applied by brush.
• • • • •
KEEP OUT OF REACH OF CHILDREN
Read all Label Cautions
Clean-up Mineral Spirits